"J" == Jarett DeAngelis jarett@bioteam.net writes:
Hi Jarett,
welcome on board.
J> Hi, I have a small collection of Skylake HP desktops I'm J> deploying Qlustar onto as a lab environment. I cannot get the J> system to boot correctly. I'm using the Windows utility "Rufus" J> to image the USB stick. If I use "dd" mode, when I try to boot it J> skips right over it as though it weren't bootable. If I use "iso" J> mode, it gets about six seconds into the boot process, loading J> modules, before it complains it can't load the vfat module. It is J> indeed not in /lib! I feel like I must be doing something wrong J> here, but damned if I can figure it out solo. I have also tried J> this on a Mac and on a Linux machine with BalenaEtcher; same J> results as "iso" mode on Rufus.
Sorry, but I know nothing about rufus. Please use the default dd route as explained in the installation guide
https://docs.qlustar.com/en-US/Qlustar_Cluster_OS/11.0/html-single/Installat...
In case you still have problems booting the stick after that, the latter is most likely corrupted (try with another one in this case). Please do the checks as described in
https://lists.qlustar.org/hyperkitty/list/qlustar-general@qlustar.org/messag...
to verify it is working correctly.
Good luck,
Roland