Thank you for providing debug instructions. First, I need to correct the RAID controller model: the server uses P212 (instead of the P410): that was by bad. Does this make a difference ? Following messages appear on the screen during installations: ... Begin: configuring fstab...done. Begin: Preconfiguring networking ... [31.190165] hpsa 0000:0d:00.0: Command timed out. [31.190325] scsi host4: hpsa [31.190491] hpsa can't handle SMP requests [61.270159] hpsa 0000:0d:00:0: Command timed out. [61.270261] hpsa 0000:0d:00:0 report physical LUNs failed. Begin: Running /scripts/init-bottom ... done. ... Command 'lsmod | grep hpsa' returns: hpsa 98304 0 scsi_transport_sas 40960 1 hpsa Command 'dmesg | tail -20* returns: .... Segment Routing via with IPv6 hpsa 0000:0d:00.0: Command timed out. hpsa 0000:0d:00.0: report physical LUNs failed device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: devel@redhat.com Command 'lsblk' returns only one line: sr0 11:0 1 4.2G 0 rom /lib/live/mount/medium I believe that's the DVD-drive I'm installing Qlustar from. I hope that the lines above will reveal something to you, Jorma