>>>> "B" == Bob Johnson
B> The nodes will not PXE boot.
Up to what stage do the nodes get in the boot process?
B> I see the standard install loads the Realtek r8169 driver. Based
B> on past experience, my hardware requires the r8168 driver.
B> Can the NIC driver be changed in qlustar?
The correct driver is automatically selected by udev according to the
uevent message generated for the device. There is no need to change it,
since the correct one should be loaded if it is present.
B> Do I execute the following commands at the root@cl-head~#
B> prompt. Or from a different location?
B> apt-get install r8168 -dkms rmmod r8169 lspci -s 3:00.0 -vv
B> (verifies the r8168 driver is loaded) reboot
This won't help.