Qlustar installation on HP Gen6 servers
by jorma.ojala@iki.fi
Hi,
Qlustar 10.1 installation failed on HP DL320 G6 server. The server has got 4 x 1TB disks, but the installer reported 'no unused disks'. I recall that the server has got the P410 RAID-controller on-board. I tried with different RAID configurations but with no luck.
Maybe this is 'too old' hardware for Qlustar ?
Cheers,
Jorma
1 year, 11 months
Add edge platform without QluMan Qt?
by Hernán Morales Durand
Hi,
Inadvertently during installation I chose CentOS 7 as my edge platform
and installing the QluMan GUI proves to be difficult on CentOS 7 due
to missing Qt dependencies. Now I am stuck trying to install an
alternative platform:
root@plato:~ # schroot -l
chroot:centos7
root@plato:~ # chroot-centos7
(centos7) root@plato:~ #
yum update
yum install qt-10 qt5-qtbase-devel mesa-libGL-devel mesa-libGLU-devel
yum install qluman-qt
Loaded plugins: keys, post-transaction-actions, protectbase
0 packages excluded due to repository protections
Resolving Dependencies
--> Running transaction check
---> Package qluman-qt.noarch 0:10.1.0.37-1.ql.el7 will be installed
--> Processing Dependency: qt-10 = 10.1.0.37-1.ql.el7 for package:
qluman-qt-10.1.0.37-1.ql.el7.noarch
--> Finished Dependency Resolution
Error: Package: qluman-qt-10.1.0.37-1.ql.el7.noarch (qlustar-10.1)
Requires: qt-10 = 10.1.0.37-1.ql.el7
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
I couldn't find how to install additional edge platform for my chroot
environment **without** requiring QluMan, in the documentation :
https://www.qlustar.com/book/docs/install-guide :
"Note that you can always add support for a previously unselected edge
platform later on by creating corresponding chroots and Qlustar images
using QluMan."
Is there an alternative way to add a platofrm without requiring the QluMan GUI?
Is better to re-run the initial config again? /usr/sbin/qlustar-initial-config
Best regards,
Hernán
2 years, 1 month
Unsigned repository (NO_PUBKEY)
by Hernán Morales Durand
Hi,
Trying to install qluman-qt on a clean (recently installed) Debian 9.2
workstation:
# dpkg -l | grep python-software-properties > /dev/null 2>&1 ||
apt-get install python3-software-properties
# apt-get install software-properties-common
# add-apt-repository 'deb http://repo.qlustar.com/repo/qluman
9.2-wheezy-proposed-updates main non-free'
# add-apt-repository 'deb http://repo.qlustar.com/repo/qluman
9.2-wheezy main non-free'
Problems start here :
# apt-get update
Ign:1 http://ftp.ccc.uba.ar/pub/linux/debian/debian stretch InRelease
Des:2 http://ftp.ccc.uba.ar/pub/linux/debian/debian stretch-updates
InRelease [91,0 kB]
Des:3 http://ftp.ccc.uba.ar/pub/linux/debian/debian stretch Release [118 kB]
Obj:4 http://security.debian.org/debian-security stretch/updates InRelease
Des:6 http://repo.qlustar.com/repo/qluman 9.2-wheezy-proposed-updates
InRelease [9.567 B]
Ign:6 http://repo.qlustar.com/repo/qluman 9.2-wheezy-proposed-updates InRelease
Des:7 http://repo.qlustar.com/repo/qluman 9.2-wheezy InRelease [9.548 B]
Ign:7 http://repo.qlustar.com/repo/qluman 9.2-wheezy InRelease
Des:8 http://repo.qlustar.com/repo/qluman
9.2-wheezy-proposed-updates/main amd64 Packages [2.653 B]
Des:9 http://repo.qlustar.com/repo/qluman
9.2-wheezy-proposed-updates/non-free amd64 Packages [2.779 B]
Des:10 http://repo.qlustar.com/repo/qluman 9.2-wheezy/main amd64
Packages [7.888 B]
Des:11 http://repo.qlustar.com/repo/qluman 9.2-wheezy/non-free amd64
Packages [2.094 B]
Descargados 244 kB en 2s (103 kB/s)
Leyendo lista de paquetes... Hecho
W: Error de GPG: http://repo.qlustar.com/repo/qluman
9.2-wheezy-proposed-updates InRelease: Las firmas siguientes no se
pudieron verificar porque su clave pública no está disponible:
NO_PUBKEY E6BA110F3C0BC307
W: El repositorio «http://repo.qlustar.com/repo/qluman
9.2-wheezy-proposed-updates InRelease» no está firmado.
N: Los datos de un repositorio como este no se pueden autenticar y por
tanto su uso es potencialmente peligroso.
N: Vea la página de manual apt-secure(8) para los detalles sobre la
creación de repositorios y la configuración de usuarios.
W: Error de GPG: http://repo.qlustar.com/repo/qluman 9.2-wheezy
InRelease: Las firmas siguientes no se pudieron verificar porque su
clave pública no está disponible: NO_PUBKEY E6BA110F3C0BC307
W: El repositorio «http://repo.qlustar.com/repo/qluman 9.2-wheezy
InRelease» no está firmado.
N: Los datos de un repositorio como este no se pueden autenticar y por
tanto su uso es potencialmente peligroso.
N: Vea la página de manual apt-secure(8) para los detalles sobre la
creación de repositorios y la configuración de usuarios.
# apt-get install qluman-qt
Leyendo lista de paquetes... Hecho
Creando árbol de dependencias
Leyendo la información de estado... Hecho
No se pudieron instalar algunos paquetes. Esto puede significar que
usted pidió una situación imposible o, si está usando la distribución
inestable, que algunos paquetes necesarios aún no se han creado o se
han sacado de «Incoming».
La siguiente información puede ayudar a resolver la situación:
Los siguientes paquetes tienen dependencias incumplidas:
qluman-qt : Depende: qluman-qt-3 pero no va a instalarse
E: No se pudieron corregir los problemas, usted ha retenido paquetes rotos.
It seems qlustar repository cannot be authenticated.
Are there any additional steps to configure?
Should I self-sign the qlustar repository?
Cheers,
Hernán
2 years, 1 month
API
by Ansgar Esztermann-Kirchner
Hello List,
there's a few areas of configuration where we'd welcome more
automation (e.g. creating a lot of nodes). Therefore, I'd like to
develop some tools that interface with the central daemon. Is there
any API documentation available?
Thanks,
A.
--
Ansgar Esztermann
Sysadmin
http://www.mpibpc.mpg.de/grubmueller/esztermann
2 years, 1 month