Hi,
On 22/05/2019 21.43, Roland Fehrenbacher wrote:
"I" == Ian Kaufman ikaufman@eng.ucsd.edu writes:
Hi Ian,
I> Nope - no /live on the installed system
I've had situations before where the installer barked when an old software RAID was present. Assuming that you really want to perform the install (which will wipe the disks anyway) you can try to just brute-force wipe the FS and RAID info before starting the installer. For that boot into your old system and do:
for d in a b; do # Assume a mirror of /dev/sd[ab]] dd if=/dev/zero of=/dev/sd$d bs=1M count=1024 done
wipefs, if exists is better alternative. It will wipe only patterns, by wich blkid and other recognise structures on disks. And after you can still reboot at least once.
Regards Rolandas
Obviously, you won't be able to shutdown anymore after this, so you'll have to reset the machine for a reboot with the installer medium present.
If that still doesn't help, you probably really have a corrupted installer medium.
Good luck,
Roland _______________________________________________ Qlustar-General mailing list -- qlustar-general@qlustar.org To unsubscribe send an email to qlustar-general-leave@qlustar.org